IVECO DYPARRO 90 T

 

Wheelbase: 4750 mm, rear air suspension,  retarder, tachograph, EURO 6 , Manufacturing year: 2018

29+1+1 seats

 

Stainless steel structure;

Aluminum and fiberglass bodywork;

Luggage volumes on the sides and rear (from composite materials);

Interior walls from fiberglass, with plush upholstery;

Two passenger doors electric operated, BCE Italy brand;

Steps for access made with stainless steel structure amd covered with parts made from moulded composite materials;

Lighting at the acces steps with LED and silicon protection;

Electrically operated and heated door mirrors;

Interior mirror;

Thermal and phonic insulation of the passenger compartment with polystyren;

Fitting floor for mounting the seats, protected against the water infiltration to the body;

Anti skid linoleum, wear-resistant in tune with the interior, raised on the lateral sides until under the rails;

Glass hatch with emergency exit;

The upper glass from the front door with defroster;

Defroster driver window with electric drive;

Left and right front windows from the driver`s vision with defroster;

Double glazed with UV protection (extra dark);

Curtains to each window in the passenger compartment;

Air conditioning 14.5 kW Autoclima; 

Kit compresor AC support driven separate by the motor belt, for delimiting the Iveco maintenance activity / Body Builder;

Climate pipes with luggage rack, made from composite materials,  with air nozzles and reading lights for each seat , including the driver;

AC free distribution grids on the upper piping, to make possible the cooling of the windows when the passengers close the individual grids;

Lighting passenger compartment with longitudinal profiles - white LEDs;

Ambiental lighting (blue / red LEDs) on the airpipes ornamental profiles, longitudinal;

Webasto AT Evo stationary heater 5.5 kW (air)  - pre-heated air intake from the bus inside (grids made from stainles steel);

Mounting rails for fixing the seats- one on the wall, one on the floor;

Plush seats 29 pcs. Reclinable, plush upholstery, handrest toward the corridor, safety belts;

Guide seat;

Driver seat with mechanical suspension and armrest;

Sun visor equipment for passenger compartment, sun visor for the driver and guide, manually operated;

Handholds at the entrance, from stainless steel, fixed with stainless bolts;

Protection partition behind the driver and at the rear door on left and right side, from stainless steel, fixed with bolts;

MP3 radio with USB slot, auxiliary exit with microphone;

Electronic clock;

LDWS system for warning the involuntary lane change;

Preparation for LCD, reversing camera mounting and monitoring system;

Body painting in white;

Main switch operated through the ignition key for separating the Iveco maintenance activity / Body Builder;

Fuses panel and electrical relays, with door for easy access and scheme with functions and amperage;

Mini-hammer for glass breaking in emergency;

First aid kit ( 2 pcs );

Fire Extinguishers ( 1 pcs );

Homologation CE - C.O.C.

IVECO DYPARRO 90 T

 

Wheelbase: 4750 mm, rear air suspension,  retarder, tachograph, EURO 6 , Manufacturing year: 2018

(31+1 +1 seats )

 

Stainless steel structure;

Aluminum and fiberglass bodywork;

Interior walls from fiberglass, with plush upholstery;

Front passenger access door with electric drive, BCE Italy brand and and rear emergency door with manual drive;

Lighting at the acces steps (Light profile and Spot );

Electrically operated and heated door mirrors;

Interior mirror;

Thermal and phonic insulation of the passenger compartment;

Fitting floor for mounting the seats, protected against the water infiltration to the body (Van);

Anti skid linoleum, wear-resistant in tune with the interior, raised on the lateral sides until under the rails;

Sunroof glass with emergency exit;

The upper glass from the front door with defroster;

Defroster driver window with electric drive;

Left and right front windows from the driver`s vision with defroster;

Panoramic simple windows with UV protection;

Lighting passenger compartment with longitudinal profiles - white LEDs;

Lamp lighting for the driver;

Heater Webasto Thermotop C (water) 5 Kw + additional water recirculation pump;

Longitudinal radiators (4 pieces)  with fans operated with electrically opening system kit;

Mounting rails for fixing the seats- one on the wall, one on the floor;

Plush seats 31 pcs., fitted according with EU standard norms, with hoods;

Guide seat;

Driver seat with mechanical suspension;

Sun visor equipment for passenger compartment, sun visor for the driver and guide;

Mounting bars inside and at the entrance, from stainless steel, fixed with bolts;

Protection partition behind the driver and at the rear door on left and right side, from stainless steel, fixed with bolts;

MP3 radio with USB slot, auxiliary exit and microphone;

Electronic clock;

Body painting in white;

Main switch operated through a board button for delimiting the Iveco maintenance activity / Body Builder;

Fuses panel and electrical relays, with door for easy access and scheme with functions and amperage;

First aid kit ( 2 pcs );

Fire Extinguishers ( 1 pcs ).

Important: Materials and solutions used for standard equipment:

Electrical installations equipped with jacks for inexpensive maintenance, safe, protected with corrugated tube and insulated against noise and vibration, with Tubolit;

All bolts / nuts related with the works that require periodic reviews, are marked with paint (seals) to identify unapproved interventions;

Fixing the installations, wiring, heating ducts and AC with necklaces, and in the principal areas, with metallic necklaces;

Sealing of technological gaps through which pass the hoses of AC and heating and electrical installations, with mastic;

Ideograms and inscriptions according EU rules are glued on plastic support for maximum grip;

Constructor plates, vehicle identification / weights and dimensions / AC, made from plastic materiale, engraved;

The plate specifying the type of freon, quantity and compressor belt, made of high resistant plastic;

Important: Materials and solutions used for standard equipment:

Electrical installations equipped with jacks for inexpensive maintenance, safe, protected with corrugated tube and insulated against noise and vibration, with Tubolit;

All bolts / nuts related with the works that require periodic reviews, are marked with paint (seals) to identify unapproved interventions;

Fixing the installations, wiring, heating ducts with necklaces, and in the principal areas, with metallic necklaces;

Sealing of technological gaps through which pass the hoses of AC and heating and electrical installations, with mastic;

Ideograms are glued on plastic support for maximum grip;

Constructor plates, vehicle identification / weights and dimensions / AC, made from plastic materiale, engraved.

IVECO DYPARRO 90 U

 

Amp. 4750mm , 7.2 tone, suspensie pneumatica spate,  retarder, tahograf, EURO 6 ,

(17 locuri pe scaune + 20 locuri in picioare + 1 loc pt. persoane cu dizabilitati + 1 ghid + 1 scaun sofer)

 

Structura din inox ;

Caroserie din aluminiu si materiale compozite;

Protectie antifonica si antisoc;

Componente de interior din materiale compozite invelite in plus;

Usa fata acces calatori cu actionare mecanism electric marca BCE Italia;

Usi duble spate acces calatori cu actionare mecanism electric marca BCE Italia;

Inchidere usi duble spate simultan sau separat,prevazute cu sistem de limitare a fortei de inchidere si sesizare pasager intre usi;

Sistem care nu permite rularea cand usile sunt deschise (inchiderea usilor va fi semnalizata);

Iluminat trepte acces (Spot);

Oglinzi exterioare reglabile electric si incalzite;   

Oglinda retrovizoare interioara;

Izolaţie termică si fonică a habitaclului;   

Amenajare podea pentru montaj scaune protejata impotriva infiltratiilor de apa spre caroserie;

Montaj linoleum antiderapant, rezistent la uzura, in ton cu capitonajul interior, ridicat pe laterale pana sub sine;

Trapă sticla cu ieşire de siguranţă;

Geam superior usa fata cu degivrare;

Geam sofer cu actionare electrica si degivrare;

Geamuri fata stanga dreapta din campul vizual al soferului , cu degivrare;

Geamuri  panoramice culisante la partea superioara cu protectie UV ;

Folie de protectie impotriva vandalismului la geamuri;

Aer Conditionat Autoclima 14,5 kW si placuta gravata pe plastic rezistent cu precizarea cantitatii, tipului de freon si a curelei de compresor;

Kit suport compresor AC antrenat separat de cureaua motorului pentru delimitarea activitatii de mentenanta Iveco/carosier;

Incalzitor in stationare Webasto AT Evo 5,5 kW (pe aer) cu distributie prin grile tubulatura coridor si admisie aer cald din interior;

Montaj sine pentru prindere scaune - o sina pe perete si una pe pod;

Scaune 17 buc, echipate conform normelor UE;

Amenajare locuri in picioare;

Scaun sofer cu suspensie mecanica;

Degajare cupola fata;

Amenajare podea joasa spate;

Amenajare 1 loc pentru persoane cu dizabilitati;

Rampa acces carucior in zona cu podea joasa;

Buton si lampa de confirmare pentru anuntul de deschidere a usii la urmatoarea oprire;

Sistem optic de anuntare a urmatoarei opriri pentru persoanele cu dizabilitati;

Dispozitive parasolare, sofer si ghid;

Montat bare de sustinere in interior si la urcare, din inox, prinse cu suruburi;

Instalatie de iluminat interior;

Pregatire montaj instalatie ulterioara a unui sistem de taxare/validator si GPS;

Radio MP3 cu slot USB cu iesire auxiliar;

Difuzoare audio;

Caroseria culoare exterioara alba;

Montat heblu pe instalatie carosier la pozitie actionare sofer,pentru delimitarea activitatii de mentenanta IVECO / CAROSIER;

Tablou de sigurante si relee electrice, cu usita pentru acces rapid si schema cu functii si amperaje;

Trusa de prim ajutor ( 2 buc );

Stingator de incendiu ( 2 buc );

Omologare RAR

Important: Materiale si solutii folosite la dotarea standard

Instalatii electrice prevazute cu mufe pentru o mentenanta ieftina,sigura, protejate cu tub grofat si izolate impotriva zgomotului la vibratii, cu Tubolit;

Toate suruburile / piulitele aferente lucrarilor care necesita revizii periodice, sunt marcate cu vopsea (sigilii) pentru identificarea interventiilor neavizate;

Prinderea conductelor si a cablajelor de incalzire Aer  Conditionat, fixate cu coliere foarte dese, iar in zonele principale cu coliere metalice;

Etansarea gaurilor tehnologice prin care trec furtunele de AC., incalzire si instalatiile electrice, cu mastic;

Ideogramele inscriptionarile conform normelor CE sunt lipite pe suport din plastic lis pentru aderenta maxima;

Placutele constructor, identificare ale vehiculului/ mase si dimensiuni/ AC confectionate din material plastic rezistent, gravate;